Zebra ZM400 Series User Manual

About This Document
Who Should Use This Document
24
14207L-001 A ZM400/ZM600 Maintenance Manual 8/9/07
Who Should Use This Document
This Maintenance Manual is intended for use by any person who needs to operate or to troubleshoot problems
with the printer.
How This Document Is Organized
The Maintenance Manual is set up as follows:
Section Description
System Description on page 29 This section provides an overview of the printer. Included are
specifications of the printer and a brief explanation of each
component and its function.
Operations on page 43 This section assists the technician with “out of the box” installation,
initial setup, and printer operation.
Troubleshooting on page 103 This section provides information about LCD, print quality,
communications, and other errors that you might need to
troubleshoot. The tables provide symptoms, diagnoses of probable
causes, and recommended actions that should result in proper
printer operation. Working with these tables, the technician can
diagnose printer faults and determine the needed repair.
Preventive and Corrective
Maintenance on page 127
This section provides various levels of printer maintenance required
for optimum performance. This section also provides information
on cleaning and general maintenance, replacement of major
assemblies, and mechanical adjustments.
Drawings and Parts on page 437 This section provides the technician with assembly drawings and
part number to maintain the printer.

Zebra ZM400 Series Specifications

General

Max Print Width	4.09 inches (104 mm)
Max Print Speed	10 inches per second (254 mm per second)
Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi (8 dots/mm)
Connectivity	USB 2.0, Serial RS-232, Parallel, Internal Ethernet (10/100), optional wireless
Media Width	1"/25.4 mm to 4.5"/114 mm
Media Length	0.25 to 39 inches (6 to 991 mm)
Media Thickness	0.0023"/0.058 mm to 0.010"/0.25 mm
Ribbon Width	1"/25.4 mm to 4.33"/110 mm
Ribbon Length	1476 feet (450 m)
Supported Media Types	Continuous, die-cut, notch, black-mark
Operating Temperature	40°F to 105°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)