Zebra ZM400 Series User Manual

413
Corrective Maintenance
Wireless Option
8/9/07 ZM400/ZM600 Maintenance Manual 14207L-001 A
Reinstall the Electronics Cover
1. See Figure 271. Install the electronics cover by aligning it and sliding down, ensuring the
lower flange is inside the base and the upper flange is between the main frame and the
media door.
Figure 271 • Locate the Upper and Lower Flanges
2. See Figure 264 on page 407. Install the four mounting screws.
3. See Figure 263 on page 406. Open the media door.
4. Install the electronics cover mounting screw and lock washer.
5. Reinstall the AC power cord and data cables.
6. Turn on (l) the printer.
1
Electronics Cover
2
Upper flanges (3)
3
Lower flanges (2)
2
1
3

Zebra ZM400 Series Specifications

General

Brand	Zebra
Model	ZM400 Series
Category	Label Maker
Language	English