Zebra ZM400 Series User Manual

Corrective Maintenance
Electronic Cover
422
14207L-001 A ZM400/ZM600 Maintenance Manual 8/9/07
Electronic Cover
Tools Required
Remove the Old Electronics Cover
1.
2.
Tools • You need these tools to complete this procedure:
 Phillips Screwdriver Set  Metric Nutdriver Set
Caution • Turn off (O) the printer and disconnect it from the power source before
performing the following procedure.
Caution • Turn off (O) the printer and disconnect it from the power source before
performing the following procedure.
Turn off (O) the printer and disconnect the AC power cord and all data cables.
Caution • While performing any tasks near an open printhead, remove all rings,
watches, hanging necklaces, identification badges, or other metallic objects that could
touch the printhead.
Remove the media and ribbon.

Zebra ZM400 Series Specifications

General

Brand	Zebra
Model	ZM400 Series
Category	Label Maker
Language	English