189
Corrective Maintenance
Ribbon Strip Plate
8/9/07 ZM400/ZM600 Maintenance Manual 14207L-001 A
Ribbon Strip Plate
Tools Required
Remove the Old Ribbon Strip Plate
1.
2.
Tools • You need these tools to complete this procedure:
Metric Hex Key (Allen Wrench) Set
Caution • Turn off (O) the printer and disconnect it from the power source before
performing the following procedure.
Turn off (O) the printer and disconnect the AC power cord and all data cables.
Caution • While performing any tasks near an open printhead, remove all rings,
watches, hanging necklaces, identification badges, or other metallic objects that could
touch the printhead.
Open the media door and remove the media and ribbon.
To Next Page
Loading...