Zebra ZM400 Series User Manual

Corrective Maintenance
Static Brush
322
14207L-001 A ZM400/ZM600 Maintenance Manual 8/9/07
Reference Materials
•ZM400/ZM600 User CD
• ZM400/ZM600 Maintenance Manual
•Z Series
®
Maintenance Manual (CD)
Tools Required
This kit includes the parts and documentation necessary to install the static brush assembly in
the following printers:
•ZM400™
•ZM600™
Read these instructions thoroughly before attempting to install this kit.
Prepare for Installation
Parts List
Figure 185 • Kit Contents
Table 23 • Kit Parts List
3 Item Qty
Part Number
Description
1
1
79854M
ZM400 Static Brush Maintenance Kit
2
1
79855M
ZM600 Static Brush Maintenance Kit
Bold = Part available for purchase.
Italic = Part not available for purchase, listed and shown for reference only.
2
1

Zebra ZM400 Series Specifications

General

Max Print Width	4.09 inches (104 mm)
Max Print Speed	10 inches per second (254 mm per second)
Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi (8 dots/mm)
Connectivity	USB 2.0, Serial RS-232, Parallel, Internal Ethernet (10/100), optional wireless
Media Width	1"/25.4 mm to 4.5"/114 mm
Media Length	0.25 to 39 inches (6 to 991 mm)
Media Thickness	0.0023"/0.058 mm to 0.010"/0.25 mm
Ribbon Width	1"/25.4 mm to 4.33"/110 mm
Ribbon Length	1476 feet (450 m)
Supported Media Types	Continuous, die-cut, notch, black-mark
Operating Temperature	40°F to 105°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)