ADCMT 6241A User Manual

6241A/6242 DC Voltage Current Source/Monitor Operation Manual
2.2.7 Sweep Measurement
2-46
25. Press , and to select 3) Mem Clear and press , ENTER to clear
the data in the measurement data memory.
26. Press MENU.
The HOME screen is displayed.
27. Ensure that the ST indicator is ON.
Starting sweep measurement
28. Press OPR.
The operational status is set.
The source value shows the bias value.
29. Press TRIG.
The sweep starts while displaying the source and the measurement values. When
the sweep is completed, the final measurement value is displayed.
Reading measurement results
30. Press STBY to set the Standby mode.
31. Press MENU.
32. Press or to select F) MEMORY. Press to go to the Select level.

ADCMT 6241A Specifications

General

Brand	ADCMT
Model	6241A
Category	Monitor
Language	English