3. Troubleshooting
3. TROUBLESHOOTING
About this chapter
This chapter enumerates all possible error codes which can appear on the local LCD display of the FLM projector. The code dis-
played is preceded by a “-”signincaseofawarning or a “+”signincaseofarealerror. Note that not all codes have a warning
and an error state. Some only have an error state, others have only a warning state. In case of a “warning” the projector remains
to operate. Nevertheless, it is recommended to solve the problem which causing the “warning” as soon as possible otherwise, the
“warning” state may turn into an “error” state which will switch off the projector consequently.
The codes are placed in ascending order to make it easier to look up the code and find an appropriate solution.
Overview
• 1000 → 1017 : Lamp parameters related errors
• 1692 → 1699 : Formatter related errors
• 2000 → 2808 : Lamp Power Supply (LPS) related errors
• 4000 : Incompatible hardware error
• 4198 : Pixel map related error
• 5095 → 5098 : Flash memory related errors
• 7658 → 7999 : Temperature, fan & motor related errors
• 8000 → 8001: Shutter related errors
• 8002 : Lamp EEPROM error
• 9198 → 9398: CPU related errors
• 10498 : Input module related error
R59770072 FLM SERIES 19/03/2007
15
To Next Page
Loading...
Need help?
General
