Barco FLM series

3. Troubleshooting
3.4 4000 : Incompatible hardware error
Error 4000 : “Incompatible hardware”
Situation Solution
One or more parts of the projector
are replaced with incompatible
parts.
• Reinstall the original parts of the projector. Use only original Barco spare parts
for servicing.
• If the problem persists, contact Barco for further instructions.
I
2
C related error. One of the boards
with an I
2
C address causes a
hardware error.
• Check the I2C status of the boards via the user interface: Service >
Diagnoses > I
2
C and replace the malfunction board.
• If the problem persists, contact Barco for further instructions.
26 R59770072 FLM SERIES 19/03/2007