Barco FLM series

3. Troubleshooting
3.6 5095 → 5098 : Flash memory related errors
Error 5095 : “Restoring unsuccessful”
Situation Solution
Restoring the custom settings from
the internal backup device has
failed.
• Check if the latest projector software is installed.
• Reinstall the latest projector software.
• If the problem persists, contact Barco for further instructions.
Error 5096 : “Storing unsuccessful”
Situation Solution
Storing the custom settings from the
internal backup device has failed.
• Check if the latest projector software i
s installed.
• Reinstall the latest projector software.
• If the problem persists, contact Barco for further instructions.
Error 5097 : “Flash management full”
Situation Solution
The reserved memory for flash
management has reached its limits.
• Check if the latest projector software is installed.
• Delete some unnecessary custom made image files.
• Delete some unnecessary custom made layout files.
• If the problem persists, contact Barco for further instructions.
Error 5098 : “Flash full”
Situation Solution
Internal backup device has reached
its maximum capacity.
• Check if the latest projector software is installed.
• Delete some unnecessary custom made image files.
• Delete some unnecessary custom made layout files.
• If the problem persists, contact Barco for further instructions.
28 R59770072 FLM SERIES 19/03/2007