15. Vertical and Horizontal shift motors
15.2 Mounting a new vertical shift motor
Necessary tools
•Allenkey3mm
•Allenkey2.5mm
•Allenkey2mm
•Allenkey1.5mm
How to mount
1. Fixate the small plate with 2 screws on the motor. Fold the wires in the same direction of the rounded side of the plate.
Image 15-6
2. Insert the motor in its compartment with the rounded side of the mounted plate upwards.
Image 15-7
Mount motor
3. Slide the axe on the motor, turn in both fixation screws A and fixate the axe on the motor with the set screw B.
R59770072 FLM SERIES 19/03/2007
143
To Next Page
Loading...
Need help?
General
