18. Cooling pump
18.1.1 Opening the cooling pump and rotor movement
Necessary tools
• Allen key 3 mm (best with ball point)
• Phillips head screwdriver
• Cloths
How to open the cooling pump
1. After the pump cooling circuit is drained, remove the 4 screws on the pump body.
Image 18-2
Remove pump cover
2. Slide the pump cover with hose backwards.
3. Take the rotor between thumb and finger and try to rotate smoothly. If the you feel any resistance or you cannot rotate it, then
the try to clean the pump.
R59770072 FLM SERIES 19/03/2007
191
To Next Page
Loading...
