Barco FLM series User Manual

3. Troubleshooting
Error 2506 : “Lamp ignition failed”
The same troubleshooting checklist can be applied to as for Error 2206. The only difference is that this error is generated by the
LPS unit with address 0x22.
Error 2507 : “Lamp voltage range”
The same troubleshooting checklist can be applied to as for Error 2207. The only difference is that this error is generated by the
LPS unit with address 0x22.
Error 2508 : “Lamp power range”
The same troubleshooting checklist can be applied to as for Error 2208. The only difference is that this error is generated by the
LPS unit with address 0x22.
Error 2801 : “PFC start failed”
The same troubleshooting checklist can be applied to as for Error 2201. The only difference is that this error is generated b
ythe
LPS unit with address 0x28.
Error 2802 : “LPS start failed”
The same troubleshooting checklist can be applied to as for Error 2202. The only difference is that this error is generated by the
LPS unit with address 0x28.
Error 2803 : “BOOST start failed”
The same troubleshooting checklist can be applied to as for Error 2203. The only diffe
rence is that this error is generated by the
LPS unit with address 0x28.
Error 2806 : “Lamp ignition failed”
The same troubleshooting checklist can be applied to as for Error 2206. The only difference is that this error is generated by the
LPS unit with address 0x28.
Error 2807 : “Lamp voltage range”
The same troubleshooting checklist can be applied to as for Error 2207.
The only difference is that this error is generated by the
LPS unit with address 0x28
Error 2808 : “Lamp power range”
The same troubleshooting checklist can be applied to as for Error 2208. The only difference is that this error is generated by the
LPS unit with address 0x28.
R59770072 FLM SERIES 19/03/2007
25

Barco FLM series Specifications

General

Brand	Barco
Model	FLM series
Category	Projector
Language	English