Barco FLM series User Manual

3. Troubleshooting
Situation Solution
Lens is touching the sensor (PR)
on the prism. Maximum lens shift
position reached.
Shift the lens upwards and/or to the left.
PR
Image 3-22
Error 7940 : “5V PMP voltage high”
This is a warning.
Situation Solution
The +5 volt supply voltage for the
Pixel Map Processor is too high.
Replace the Fan & Motor control board.
Error 7941 : “5V PMP voltage low”
This is a warning.
Situation Solution
The +5 volt supply voltage for the
Pixel Map Proce
ssor is too low.
Replace the Fan & Motor control board.
Error 7942 : “5V FIB voltage high”
This is a warning.
Situation Solution
The +5 volt supply voltage for the
Formatter Interface Board is too
high.
Replace the Fan & Motor control board.
Error 7943 : “5V FIB voltage low”
This is a warning.
Situation Solution
The +5 volt supply voltage for the
Formatter Interface Board is too low.
Replace the Fan & Motor control board.
Error 7944 : “5V voltage high”
This is a warning.
46 R59770072 FLM SERIES 19/03/2007

Barco FLM series Specifications

General

Brand	Barco
Model	FLM series
Category	Projector
Language	English