Branson 2000Xc - Page 260

100-412-234 REV. 06 247
274
Pretrigger
Conflict
The pretrigger
distance is equal to or
greater than the minus
suspect trigger limit.
Change the pretrigger distance
or - suspect trigger limit
through the Alarm Information
screen or Setup menu.
275
Pretrigger
Conflict
The pretrigger
distance is equal to or
greater than the
absolute cutoff distance
Change the pretrigger distance
or absolute cutoff through the
Alarm Information screen or
Setup menu.
276
Pretrigger
Conflict
The pretrigger
distance is equal to or
greater than the
absolute distance.
Change the pretrigger distance
or absolute distance through
the Alarm Information screen
or Setup menu.
277
Abs Cutoff
Conflict
The absolute cutoff
distance is equal to or less
than the minus reject
absolute limit.
Change the absolute cutoff
distance or
- reject absolute distance limit
through the Alarm Information
screen or Setup menu.
278
Abs Cutoff
Conflict
The absolute cutoff
distance is equal to or less
than the minus reject
trigger limit.
Change the absolute cutoff
distance or
- reject trigger distance limit
through the Alarm Information
screen or Setup menu.
279
Abs Cutoff
Conflict
The absolute cutoff
distance is equal to or less
than the minus suspect
absolute limit.
Change the absolute cutoff
distance or
- suspect absolute distance
limit through the Alarm
Information screen or Setup
menu.
280
Missing Part
Conflict
The missing part
maximum distance is equal
to or less than the minus
reject trigger limit.
Change the missing part
minimum limit or
- reject trigger limit through
the Alarm Information screen
or Setup menu.
282
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the minus
suspect absolute limit.
Change the missing part
minimum distance limit or -
suspect absolute distance limit
through the Alarm Information
screen or Setup menu.
283
Missing Part
Conflict
The missing part
maximum distance is equal
to or less than the minus
suspect
trigger limit.
Change the missing part
maximum distance limit or -
suspect trigger limit through
the Alarm Information screen
or Setup menu.
Table B.5 Setup Alarms and Messages, with Probable Cause and Corrective Action (Continued)
Alarm
ID
Display
Message
Alarm Condition/Cause Corrective Action