Branson 2000Xc - Page 261

248 100-412-234 REV. 06
284
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the minus
suspect trigger limit.
Change the missing part
minimum distance limit or -
suspect trigger limit through
the Alarm Information screen
or Setup menu.
285
Missing Part
Conflict
The missing part
maximum distance is equal
to or greater than the plus
reject absolute limit.
Change the missing part
maximum distance limit or
+reject absolute limit through
the Alarm Information screen
or Setup menu.
286
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the plus
reject absolute limit.
Change the missing part
minimum distance limit or
+reject absolute distance limit
through the Alarm Information
screen or Setup menu.
287
Missing Part
Conflict
The missing part maximum
distance is equal to or less
than the plus reject trigger
limit.
Change the missing part
maximum distance or +reject
trigger distance limit through
the Alarm information screen
or Setup menu.
288
Missing Part
Conflict
The missing part
minimum distance is equal
to or less than the plus
reject trigger limit.
Change the missing part
minimum distance limit or
+reject trigger distance limit
through the Alarm Information
screen or Setup menu.
289
Missing Part
Conflict
The missing part
maximum distance is equal
to or less than the plus
suspect
absolute limit.
Change the missing part
maximum distance limit or
+suspect absolute distance
limit through the Alarm
Information screen or Setup
menu.
290
Missing Part
Conflict
The missing part
maximum distance is equal
to or greater than the
absolute distance setting.
This alarm occurs in
absolute mode only.
Change the missing part
maximum distance limit or
absolute distance through the
Alarm Information screen or
Setup menu.
291
Energy
Comp
Conflict
The plus reject energy limit
is equal to or less than the
minimum energy
compensation value. This
alarm occurs in time mode
only.
Change the +Reject energy
limit or minimum energy
compensation through the
Alarm Information screen or
Setup menu.
Table B.5 Setup Alarms and Messages, with Probable Cause and Corrective Action (Continued)
Alarm
ID
Display
Message
Alarm Condition/Cause Corrective Action