Bruker BioSpin Solid State NMR - Figure 3.17. WB Probes: Eject;Insert Connections; Figure 3.18. WB Probes: DVT, Probe Connections for RT and HT Measurements

MAS Tubing Connections
User Manual Version 002 BRUKER BIOSPIN 29 (327)
Figure 3.17. WB Probes: Eject/Insert Connections
Figure 3.18. WB Probes: DVT, Probe Connections for RT and HT Measurements
1. Sample insert/eject
2. Eject gas in
3. Insert gas in
4. Flush gas for transfer tube
5. T-piece to insert tube (allows the flush gas to be fed in
at low temperature to avoid ice formation on spinner cap)
6. Shim stack flush connection
1. Thermocouple(s)
2. Bearing gas in
3. Drive gas in
4. PICS cable
5. Heater
6. Heater cable in
7. VT gas in
8. Spin rate cable
9. Flush gas in