Section 7. Installation
7.5.1 Tools — Setup
Configuration tools include the following:
• Device Configuration Utility
(p. 103)
• Network Planner (p. 104)
• Info tables and settings (p. 107)
• CRBasic program (p. 108)
• Executable CPU: files (p. 108)
• Keyboard display (p. 454)
• Terminal commands
7.5.1.1 DevConfig — Setup Tools
The most versatile set up tool is Device Configuration Utility, or DevConfig. It is
bundled with LoggerNet, PC400, RTDAQ, or it can be downloaded from
www.campbellsci.com/downloads. It has the following basic features:
• Extensive context sensitive help
• Connects directly to the CR800 over a serial or IP connection
• Facilitates access to most settings, status fields, and info table
information fields
• Includes a terminal emulator that facilitates access to the command
prompt of the CR800
DevConfig Help guides you through connection and use. The simplest connection
is to connect a serial cable from the computer COM port or USB port to the RS-
232 port on the CR800 as shown in figure Connect Power and Comms.
To Next Page
Loading...
Need help?
General
