Campbell CR800 Series - Data Retrieval and Comms - Details; Protocols

Section 8. Operation
426
File System Error Codes
Error Code Description
25
Access to uninitialized ram drive
26
Attempted rename across devices
27
Subdirectory is not empty
31
Attempted write to Write Protected disk
32
No response from drive (Door possibly open)
33
Address mark or sector not found
34
Bad sector encountered
35
DMA memory boundary crossing error
36
Miscellaneous I/O error
37
Pipe size of 0 requested
38
Memory-release error (relmem)
39
FAT sectors unreadable (all copies)
40
Bad BPB sector
41
Time-out waiting for filesystem available
42
Controller failure error
43
Pathname exceeds _MAX_PATHNAME
8.9 Data Retrieval and Comms — Details
Related Topics:
• Data Retrieval and Comms — Quickstart (p. 38)
• Data Retrieval and Comms — Overview (p. 76)
• Data Retrieval and Comms — Details (p. 426)
• Data Retrieval and Comms Peripherals — Lists (p. 568)
Comms, in the context of CR800 operation, is the movement of information
between the CR800 and another computing device, usually a PC. The information
can be data, program, files, or control commands.
8.9.1 Protocols
The CR800 communicates with datalogger support software (p. 86) and other
Campbell Scientific dataloggers
(p. 561) using the PakBus (p. 508) protocol. See
Alternate Comms Protocols
(p. 428) for information on other supported protocols,
such as TCP/IP, Modbus, etc.