Campbell CR800 Series - Datalogger Keyboard;Displays; Hardwire, Single-Connection Comms Devices; E.7.1 Keyboard;Display - List

Appendix E. Supporting Products — List
569
Many comms devices are available for use with the CR800 datalogger.
E.7.1 Keyboard/Display — List
Related Topics:
• Keyboard/Display — Overview (p. 80)
• Keyboard/Display — Details
(p. 443)
• Keyboard/Display — List
(p. 569)
• Custom Menus — Overview
(p. 82)
Datalogger Keyboard/Displays
1
Datalogger Model Compatible Keyboard Displays
CR6
CR1000KD
2
(p. 493), CD100 (p. 491),
CD295
CR800
CR1000KD
2
, CD100, CD295
CR850
Integrated keyboard display,
CR1000KD
2
, CD100, CD295
CR1000
CR1000KD
2
, CD100, CD295
CR3000
Integrated keyboard display,
CR1000KD
2
(requires special OS),
CD100 (requires special OS),CD295
1
Keyboard displays are either integrated into the datalogger or communicate
through the CS I/O port.
2
The CR1000KD can be mounted to a surface by way of the two #4-40 x
0.187 screw holes at the back.
E.7.2 Hardwire, Single-Connection Comms Devices — List
Hardwire, Single-Connection Comms Devices
Model Description
SC32B
Optically isolated CS I/O to PC RS-
232 interface (requires PC RS-232
cable)
SC929 CS I/O to PC RS-232 interface cable
SC-USB
Optically isolated RS-232 to PC USB
cable
17394
RS-232 to PC USB cable (not
optically isolated)
10873
RS-232 to RS-232 cable, nine-pin
female to nine-pin male
SRM-5A with SC932A
CS I/O to RS-232 short-haul
telephone modems