Campbell CR800 Series - Info Tables and Settings: D; Info Tables and Settings: E

Appendix A. Info Tables and Settings
540
Info Tables and Settings: D
Keyword Data Type
Read Only
• Where to Find
Description
DataFillDays()
Numeric Y
• DataTableInfo table
Reports the time required to fill a data table. Each table has its own entry.
DataRecord
Size()
Numeric Y
• DataTableInfo table
Reports the number of records in a data table.
DataTable
Name()
String Y
• DataTableInfo table
Reports the names of data tables. Array elements are in the order the data tables are
declared in the CRBasic program.
DNS()
String
• Settings Editor: Ethernet, CS I/O IP, PPP, Wi-Fi | DNS Server 1, DNS Server 2
• Keyboard: Settings (Network Services)
Specifies the addresses of two domain name servers that the CR800 can use to resolve
domain names to IP addresses. Note that if DHCP is used to resolve IP information, the
addresses obtained via DHCP are appended to this list. Defaults to 0.0.0.0. Form: 0–255.0–
255.0–255.0-255
Info Tables and Settings: E
Keyword Data Type
Read Only
• Where to Find
Description
ErrorCalib
Numeric Y
• Status table field: ≈25
Number of erroneous calibration values measured. Erroneous values are discarded. Auto
self-calibration runs in a hidden slow-sequence scan. Updated at startup or auto self-
calibration.
EthernetEnable
Numeric
• Settings Editor: Ethernet | Ethernet Enable
EthernetInfo
String
• Settings Editor: Ethernet | {info box}
EthernetPower
UINT2
• Settings Editor: Ethernet | Ethernet Power
0 to 4, 4 = always off