Campbell CR800 Series - Dataloggers; E. Supporting Products - List

561
Appendix E. Supporting Products — List
Supporting products power and expand the measurement and control capability of
the CR800. Products listed are manufactured by a Campbell Scientific group
company unless otherwise noted. Consult product literature at
www.campbellsci.com or a Campbell Scientific sales engineer to determine what
products are most suited to particular applications. The following listings are not
exhaustive, but are current as of the manual publication date.
E.1 Dataloggers — List
Related Topics:
• Datalogger — Quickstart (p. 36)
• Datalogger — Overview
(p. 56)
• Dataloggers — List
(p. 561)
Other Campbell Scientific datalogging devices can be used in networks with the
CR800. Data and control signals can pass from device to device with the CR800
acting as a master, peer, or slave. Dataloggers communicate in a network via
PakBus
®
, Modbus, DNP3, RS-232, SDI-12, or CANbus using the SDM-CAN
module.
Dataloggers
Model Description
CR200X Series
Dataloggers
Limited input, not expandable.
Suited for a network of stations with a
small numbers of specific inputs.
Some models have built-in radio
transceivers for spread-spectrum
communication and various frequency
bands.
CR800-Series
Dataloggers
Limited input, but expandable.
Suited for a network of stations with
small numbers of specific inputs.
The CR850 has a built-in keyboard
and display.
CR6
Measurement and Control Datalogger
12 universal input terminals accept
analog or pulse inputs. 4 I/O
terminals are configurable for control
or multiple communication pr
otocols.
This instrument is very versatile,
expandable, and networkable.
CR1000
Measurement and Control System
16 analog input terminals, two pulse
input terminals, eight control / I/O
terminals. Expandable.