Campbell CR800 Series - Info Tables and Settings: Other; Info Tables and Settings: Programming; Info Tables and Settings: Crbasic Program I; Info Tables and Settings: Crbasic Program II

Appendix A. Info Tables and Settings
535
A.1.1.5 Info Tables and Settings: Programming
Info Tables and Settings: CRBasic Program I
BuffDepth (p. 537)
CompileResults
(p. 539)
IncludeFile
(p. 542)
LastSlowScan()
(p. 543)
MaxBuffDepth
(p. 544)
MaxProcTime
(p. 544)
MaxSlowProcTime()
(p. 544)
MeasureOps
(p. 544)
MeasureTime
(p. 544)
Messages
(p. 545)
Info Tables and Settings: CRBasic Program II
ProcessTime (p. 547)
ProgErrors
(p. 547)
ProgName
(p. 548)
SkippedScan
(p. 550)
SkippedSlowScan()
(p. 550)
SlowProcTime()
(p. 550)
StartTime
(p. 550)
StartUpCode
(p. 550)
VarOutOfBound
(p. 552)
A.1.1.6 Info Tables and Settings: Other
Info Tables and Settings: Auto Self-Calibration
CalDiffOffset() (p. 537)
CalGain()
(p. 537)
CalSeOffset()
(p. 538)
ErrorCalib
(p. 540)
LastSystemScan
(p. 543)
MaxSystemProcTime
(p. 544)
SkippedSystemScan
(p. 550)
SystemProcTime
(p. 550)
Info Tables and Settings: Data
DataFillDays() (p. 540)
DataRecordSize()
(p. 540)
DataTableName()
(p. 540)
SecsPerRecord()
(p. 549)
SkippedRecord()
(p. 549)
Info Tables and Settings: Data Table Information Table (DTI) Keywords
DataFillDays() (p. 540)
DataRecordSize()
(p. 540)
DataTableName()
(p. 540)
SecsPerRecord()
(p. 549)
SkippedRecord()
(p. 549)
Info Tables and Settings: Memory
CPUDriveFree
(p. 539)
FilesManager
(p. 541)
FullMemReset
(p. 541)
MemoryFree
(p. 544)
MemorySize
(p. 544)
USRDriveFree
(p. 551)
USRDriveSize
(p. 551)
Info Tables and Settings: Miscellaneous
PanelTemp
(p. 546)
PortConfig()
(p. 547)
PortStatus()
(p. 547)
RecNum
(p. 548)
StationName
(p. 550)
SW12Volts
(p. 550)
TimeStamp
(p. 551)
UTCOffset
(p. 551)
WatchdogErrors
(p. 552)