Campbell CR800 Series - FIGURE 76: Settling Time for Pressure Transducer

Section 8. Operation
321
BeginProg
Scan(1,Sec,3,0)
BrFull(PT(1),1,mV7.5,1,Vx1,2500,True,True,100, 250,1.0,0)
BrFull(PT(2),1,mV7.5,1,Vx1,2500,True,True,200, 250,1.0,0)
BrFull(PT(3),1,mV7.5,1,Vx1,2500,True,True,300, 250,1.0,0)
BrFull(PT(4),1,mV7.5,1,Vx1,2500,True,True,400, 250,1.0,0)
BrFull(PT(5),1,mV7.5,1,Vx1,2500,True,True,500, 250,1.0,0)
BrFull(PT(6),1,mV7.5,1,Vx1,2500,True,True,600, 250,1.0,0)
BrFull(PT(7),1,mV7.5,1,Vx1,2500,True,True,700, 250,1.0,0)
BrFull(PT(8),1,mV7.5,1,Vx1,2500,True,True,800, 250,1.0,0)
BrFull(PT(9),1,mV7.5,1,Vx1,2500,True,True,900, 250,1.0,0)
BrFull(PT(10),1,mV7.5,1,Vx1,2500,True,True,1000, 250,1.0,0)
BrFull(PT(11),1,mV7.5,1,Vx1,2500,True,True,1100, 250,1.0,0)
BrFull(PT(12),1,mV7.5,1,Vx1,2500,True,True,1200, 250,1.0,0)
BrFull(PT(13),1,mV7.5,1,Vx1,2500,True,True,1300, 250,1.0,0)
BrFull(PT(14),1,mV7.5,1,Vx1,2500,True,True,1400, 250,1.0,0)
BrFull(PT(15),1,mV7.5,1,Vx1,2500,True,True,1500, 250,1.0,0)
BrFull(PT(16),1,mV7.5,1,Vx1,2500,True,True,1600, 250,1.0,0)
BrFull(PT(17),1,mV7.5,1,Vx1,2500,True,True,1700, 250,1.0,0)
BrFull(PT(18),1,mV7.5,1,Vx1,2500,True,True,1800, 250,1.0,0)
BrFull(PT(19),1,mV7.5,1,Vx1,2500,True,True,1900, 250,1.0,0)
BrFull(PT(20),1,mV7.5,1,Vx1,2500,True,True,2000, 250,1.0,0)
CallTable Settle
NextScan
EndProg
FIGURE 76: Settling Time for Pressure Transducer