Campbell CR800 Series - Analog Input Modules; E.2 Measurement and Control Peripherals - List

Appendix E. Supporting Products — List
562
Dataloggers
Model Description
CR3000
Micrologger
28 analog input terminals, four pulse
input terminals, eight control / I/O
terminals. Faster than CR1000.
Expandable.
CR9000X-Series
Measurement, Control, and I/O
Modules
High speed, configurable, modular,
expandable
E.2 Measurement and Control Peripherals — List
Related Topics:
• Measurement and Control Peripherals — Overview (p. 82)
• Measurement and Control Peripherals — Details
(p. 393)
• Measurement and Control Peripherals — Lists
(p. 562)
E.3 Sensor-Input Modules — List
Input peripherals expand sensor input capacity of the CR800, condition sensor
signals, or distribute the measurement load.
E.3.1 Analog Input Modules — List
Analog-input modules increase CR800capacity. Some multiplexers allow
multiplexing of excitation (analog output) terminals.
Analog Input Modules
Model Description
AM16/32B
64 channels — configurable for many
sensor types. Muliplex analog inputs
and excitation.
AM25T
25 channels — multiplexes analog
inputs. Designed for thermocouples
and differential inputs
E.3.2 Pulse Input Modules — List
Related Topics:
• Low-Level Ac Input Modules — Overview (p. 395)
• Low-Level Ac Measurements — Details (p. 372)
• Pulse Input Modules — List (p. 562)
These modules expand and enhance pulse- and frequency-input capacity.