Campbell CR800 Series - Protection from Moisture - List; Protection from Moisture - Products

Appendix E. Supporting Products — List
580
CM310
1.42 meter (56 in) mast, stainless
steel, free standing, tripod, and guyed
options
E.13 Protection from Moisture — List
Protection from Moisture — Products
Model Description
6714
Desiccant 4 Unit Bag (Qty 20).
Usually used in ENC enclosures to
protect the CR800.
A150-L
Single Sensor Terminal Case, Vented
w/Desiccant.
4091
Desiccant 0.75g Bag. Normally used
with Sentek water content probes.
25366
CS450, CS451, CS455, and CS456
Replacement Desiccant Tube.
Normally used with CS4xx sensors.
10525
Desiccant and Document Holder,
User Installed. Normally use with
ENC enclosures.
3885 Desiccant 1/2 Unit Bag (Qty 50).
CS210
Enclosure Humidity Sensor 11 Inch
Cable.