Campbell CR800 Series - File Control Functions

Section 8. Operation
417
File Control Functions
File Control Functions Accessed Through
Sending programs to the CR800
Program Send
1
, File Control Send
2
, DevConfig
3
,
CR1000KD keyboard/display, or powerup.ini with a
Campbell Scientific mass storage device
4,5
, web API (p.
435) HTTPPut (Sending a File to a Datalogger)
Setting program file attributes. See File Attributes (p. 418)
File Control
2
; power-up with Campbell Scientific mass
storage device
5
, FileManage() instruction
6
, web API
FileControl
Sending an OS to the CR800. Reset CR800 settings.
DevConfig
3
Send OS tab; DevConfig
3
File Control tab;
Campbell Scientific mass storage device
5
Sending an OS to the CR800. Preserve CR800 settings.
Send
1
; DevConfig
3
File Control tab; power-up with
Campbell Scientific mass storage device with
default.cr8 file
5
, web API HTTPPut (Sending a File to
a Datalogger)
Formatting CR800 memory drives
File Control
2
, power-up with Campbell Scientific mass
storage device
5
, web API FileControl
Retrieving programs from the CR800
Retrieve
7
, File Control
2
, keyboard with Campbell
Scientific mass storage device
4
, web API NewestFile
Prescribes the disposition (preserve or delete) of old
data files on Campbell Scientific mass storage device
File Control
2
, power-up with Campbell Scientific mass
storage device
5
, web API (p. 435) FileControl
Deleting files from memory drives
File Control
2
, power-up with Campbell Scientific mass
storage device
5
, web API FileControl
Stopping program execution
File Control
2
, web API FileControl
Renaming a file
FileRename()
6
Time-stamping a file
FileTime()
6
List files
File Control
2
, FileList()
6
, web API ListFiles
Create a data file from a data table
TableFile()
6
, Keyboard/display: Data | Final Storage
Data | Copy Data To CRD:
8
JPEG files manager
CR1000KD Keyboard/Display, LoggerNet |
PakBusGraph, web API NewestFile
Hiding files Web API FileControl
Encrypting files Web API FileControl
Editing programs CR1000KD Keyboard/Display
Abort program on power-up Hold DEL down on datalogger keypad
1
Datalogger support software (p. 86) Program Send (p. 510) command
2
Datalogger support software File Control (p. 498) utility
3
Device Configuration Utility (DevConfig) (p. 103) software