Campbell CR800 Series User Manual

Appendix E. Supporting Products — List
570
Hardwire, Single-Connection Comms Devices
Model Description
SDM-CAN Datalogger-to-CANbus Interface
FC100
Fiber optic modem. Two required in
most installations.
E.7.3 Hardwire, Networking Devices — List
Hardwire, Networking Devices
Model Description
MD485 RS-485 multidrop interface
E.7.4 TCP/IP Links — List
TCP/IP Links — List
Model Description
RavenX Series Wireless, cellular, connects to RS-
232 port, PPP/IP key must be enabled
to use CR800 IP stack.
NL240 Wireless network link interface,
connects to CS I/O port.
NL201 Network link interface, connects to
CS I/O port.
E.7.5 Telephone Modems — List
m
Telephone Modems
Model Description
COM220 9600 baud
COM320 9600 baud, synthesized voice
RAVENX Series Cellular network link
E.7.6 Private-Network Radios — List
m
Private-Network Radios
Model Description
RF401 Series
Spread-spectrum, 100 mW, CS I/O
connection to remote CR800
datalogger. Compatible with RF430.

Campbell CR800 Series Specifications

General

Brand	Campbell
Model	CR800 Series
Category	Data Loggers
Language	English