Campbell CR800 Series - FIGURE 12: PC200 W View Data Table; Procedure: (PC200 W Steps 11 to 12); Procedure: (PC200 W Steps 13 to 14)

Section 4. Quickstart
51
4.6.5.6 Procedure: (PC200W Steps 11 to 12)
11. Click on to open a file for viewing. In the dialog box, select the
CR800_OneMin.dat file and click Open.
12. The collected data are now shown.
FIGURE 12: PC200W View Data Table
4.6.5.7 Procedure: (PC200W Steps 13 to 14)
13. Click the heading of any data column. To display the data in that column in a
line graph, click the icon.
14. Close the Graph and View windows, and then close the PC200W program.