Appendix E. Supporting Products — List
Pulse Input Modules
Model Description
SDM-INT8 Eight-channel interval timer
SDM-SW8A Eight-channel, switch closure module
LLAC4 Four-channel, low-level ac module
E.3.3 Serial I/O Modules — List
Serial I/O peripherals expand and enhance input capability and condition serial
signals.
Serial I/O Modules List
Model Description
SDM-SIO1 One-channel I/O expansion module
SDM-SIO4 Four-channel I/O expansion module
SDM-IO16 16-channel I/O expansion module
E.3.4 Vibrating Wire Input Modules — List
Vibrating wire input modules improve the measurement of vibrating wire sensors.
CDM modules require the SC-CPI interface module to connect to the CR800
datalogger.
Vibrating Wire Input Modules
Model Description
CDM-VW300
Two-channel dynamic VSPECT
vibrating wire measurement device
CDM-VW305
Eight-channel dynamic VSPECT
vibrating wire measurement device
AVW200 Series
Two-channel static VSPECT vibrating
wire measurement device
E.3.5 Passive Signal Conditioners — List
Signal conditioners modify the output of a sensor to be compatible with the
CR800.
To Next Page
Loading...
Need help?
General
