Section 8. Operation
Low-level ac input modules increase the number of low-level ac signals a CR800
can monitor by converting low-level ac to high-frequency pulse.
8.4.5 Serial I/O Modules — Details
Read More For more information see appendix Serial I/O Modules List (p.
563).
Capturing input from intelligent serial-output devices can be challenging. Several
Campbell Scientific serial I/O modules are designed to facilitate reading and
parsing serial data.
8.4.6 Terminal-Input Modules
Read More See Passive Signal Conditioners — List (p. 563).
Terminal Input Modules (TIMs) are devices that provide simple measurement-
support circuits in a convenient package. TIMs include voltage dividers for
cutting the output voltage of sensors to voltage levels compatible with the CR800,
modules for completion of resistive bridges, and shunt modules for measurement
of analog-current sensors.
8.4.7 Vibrating Wire Modules
Read More For complete information, see Vibrating Wire Modules — List
(p. 563).
Vibrating wire modules interface vibrating wire transducers to the CR800.
8.5 Datalogger Support Software — Details
Related Topics:
• Datalogger Support Software — Quickstart (p. 39)
• Datalogger Support Software — Overview
(p. 86)
• Datalogger Support Software — Details
(p. 396)
• Datalogger Support Software — Lists
(p. 571)
Datalogger support software facilitates program generation, editing, data retrieval,
and real-time data monitoring.
• PC200W Starter Software is available at no charge at
www.campbellsci.com/downloads. It supports a transparent RS-232
connection between PC and CR800, and includes Short Cut for creating
CR800 programs. Tools for setting the datalogger clock, sending
programs, monitoring sensors, and on-site viewing and collection of data
are also included.
• LoggerLink Mobile Apps are simple yet powerful tools that allow an iOS
or Android device to communicate with IP-enabled CR800s. The apps
To Next Page
Loading...
Need help?
General
