Section 8. Operation
8.11.4 File Management
FIGURE 105: CR1000KD: File Management
8.11.4.1 File Edit
The CRBasic Editor is recommended for writing and editing datalogger programs.
When making minor changes with the CR1000KD Keyboard/Display, restart the
program to activate the changes, but be aware that, unless programmed for
otherwise, all variables, etc. will be reset. Remember that the only copy of
changes is in the CR800 until the program is retrieved using datalogger support
software or removable memory.
To Next Page
Loading...
Need help?
General
