Campbell CR800 Series - Resistive Bridge TIM Modules; Voltage Divider Modules; Current-Shunt Modules; Transient Voltage Suppressors

Appendix E. Supporting Products — List
564
E.3.5.1 Resistive-Bridge TIM Modules — List
Resistive Bridge TIM
1
Modules
Model Description
4WFBS120 120 Ω, four-wire, full-bridge TIM
module
4WFBS350 350 Ω, four-wire, full-bridge TIM
module
4WFBS1K 1 kΩ, four-wire, full-bridge TIM
module
3WHB10K 10 kΩ, three-wire, half-bridge TIM
module
4WHB10K 10 kΩ, four-wire, half-bridge TIM
module
4WPB100 100 Ω, four-wire, PRT-bridge TIM
module
4WPB1K 1 kΩ, four-wire, PRT-bridge TIM
module
1
Teriminal Input Module
E.3.5.2 Voltage Divider Modules — List
Voltage Divider Modules
Model Description
VDIV10:1 10:1 voltage divider
VDIV2:1 2:1 voltage divider
CVD20 Six-channel 20:1 voltage divider
E.3.5.3 Current-Shunt Modules — List
Current-Shunt Modules
Model Description
CURS100 100 ohm current-shunt module
E.3.5.4 Transient Voltage Suppressors — List
Transient Voltage Suppressors
Model Description
16980 Surge-suppressor kit for UHF/VHF radios
14462 Surge-suppressor kit for RF401 radio & CR206
datalogger
16982 Surge-suppressor kit for RF416 radio & CR216
datalogger