7. Installation
Related Topics:
• Quickstart (p. 35)
• Specifications (p. 91)
• Installation (p. 93)
• Operation (p. 311)
7.1 Enclosures — Details
Enclosures — Details (p. 93)
Enclosures — Products (p. 578)
Illustrated in figure Enclosure (p. 93) is the typical use of enclosures available from
Campbell Scientific designed for housing the CR800. This style of enclosure is
classified as NEMA 4X (watertight, dust-tight, corrosion-resistant, indoor and
outdoor use). Enclosures have back plates to which are mounted the CR800
datalogger and associated peripherals. Back plates are perforated on one-inch
centers with a grid of holes that are lined as needed with anchoring nylon inserts.
The CR800 base has mounting holes through which small screws are inserted into
the nylon anchors. Screws and nylon anchors are supplied in a kit that is included
with the enclosure.
FIGURE 28: Enclosure
To Next Page
Loading...
