Campbell CR800 Series - Data File Formats; Tablefile() Instruction Data File Formats

Section 8. Operation
411
Caution Only remove mass-storage devices when the LED is not
flashing or lit.
Do the following when using Campbell Scientific mass-storage devices:
• Format as FAT32
• Connect to the CR800 CS I/O port
• Remove only when inactive or data corruption may result
8.8.2 Data File Formats
Data file format options are available with the TableFile() instruction. Time-
series data have an option to include header, time stamp and record number. See
the table TableFile() Instruction Data File Formats
(p. 411). For a format to be
compatible with datalogger support software
(p. 86) graphing and reporting tools,
header, time stamps, and record numbers are usually required. Fully compatible
formats are indicated with an asterisk. A more detailed discussion of data-file
formats is available in the Campbell Scientific publication LoggerNet Instruction
Manual, which is available at www.campbellsci.com.
TableFile() Instruction Data File Formats
TableFile()
Format
Option
Base
File
Format
Elements Included
Header
Information
Time
Stamp
Record
Number
0
1
TOB1   
1
TOB1
 
2
TOB1
 
3
TOB1

4
TOB1
 
5
TOB1

6
TOB1

7
TOB1
8
1
TOA5
  
9
TOA5
 
10
TOA5
 
11
TOA5

12
TOA5
 
13
TOA5

14
TOA5
