Appendix A. Info Tables and Settings
Note Communication and processor bandwidth are consumed when
generating the Status and and other information tables. If the CR800 is
very tight on processing time, as may occur in very long or complex
operations, retrieving these tables repeatedly may cause skipped scans
(p.
472).
Note that the following settings force the CR800 program to recompile, which
may cause loss of data. Before changing settings, collect your data.
• IP Address
• IP Default Gateway
• Subnet Mask
• PPP Interface
• PPP dial string
• PPP dial response
• Baud rate change on control ports
• Maximum number of TLS server connections
• USR drive size
• PakBus encryption key
• PakBus/TCP server port
• HTTP service port
• FTP service port
• PakBus/TCP service port
• PakBus/TCP Client Connections
• Communication allocation
List of resettable fields:
• WatchdogErrors
• Low12VCount
• Low5VCount
• VarOutOfBound
• SkippedScan
To Next Page
Loading...
