5.4 Setting the System Settings (Common Settings)
131
5
System Administration Mode Settings
Tray 5 (Bypass) Paper Size Defaults
When making copies on Tray 5 (Bypass), set the paper size that is displayed in
the Tray 5 (Bypass) screen at Paper Supply.
Paper sizes can be assigned to tray 5 standard size buttons 1 to 11.
When frequently making copies on non-standard size paper, you need not enter
the paper size each time you make a copy if the paper size is preset.
Setting frequently used paper sizes in descending order makes operations even
easier.
1. to 11. Tray 5 (Bypass) Paper Size Defaults 1 to 11
11 sizes can be registered to these buttons from the following sizes:
Buttons are registered in order from Tray 5 Standard Size Button 1 from the top of the Tray 5
(Bypass) screen at Paper Supply.
(The defaults are as follows in order from Tray 5 Standard Size Button 1.)
A3 , A4 , A4 , A5 , B4 , B5 , 12 × 18" , 11 × 17" , 8.5 × 11"
A Series B Series Dis-
play
A3 , A4 , A4 , A5 , A5 , A6 , B4 , B5 , B5 , B6
Inch Size Display
12 × 8" , 11 × 17" , 11 × 15" , 8.5 × 14" , 8.5 × 13" , 8.5
× 11" , 8.5 × 11" , 5.5 × 8.5" , 5.5 × 8.5"
Other
8K , 16K , 16K
Enter Size Set the X (horizontal) within the range 140 to 482.6 mm and the
Y (vertical) direction within the range 100 to 305 mm in 1mm
increments.
To Next Page
Loading...
Need help?
General
