5.5 Copy Mode Settings
149
5
System Administration Mode Settings
18. Lighter/Darker
Set the default of Lighter/Darker under Lighter/Darker/Contrast in the Image Quality screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 3 as Normal.)
For details about the Lighter/Darker, see “3.18 Adjusting Copy Density and Contrast - Lighter/Darker/Con-
trast” (P. 371) in “Part 2 Copier”.
19. Contrast
Set the default of Contrast under Lighter/Darker/Contrast in the Image Quality screen. Enter the set-
ting values using the numeric keypad referring to the table below.
(Default is 2 as Normal.)
For details about Contrast, see “3.18 Adjusting Copy Density and Contrast - Lighter/Darker/Contrast” (P. 371)
in “Part 2 Copier”.
Setting Value Description
0 Light (+3)
1 Light (+2)
2 Light (+1)
3Normal
4 Darker (+1)
5 Darker (+2)
6 Darker (+3)
Setting Value Description
0 Higher
1High
2Normal
3 Low
4 Lower
To Next Page
Loading...