Fuji Xerox DocumentCentre C400 Series User Manual

5.5 Copy Mode Settings
150
5
System Administration Mode Settings
20. Sharpness
Set the default of Sharpness under Sharpness/Color Saturation in the Image Quality screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 2 as Normal.)
For details about Sharpness, see “3.19 Adjusting the Sharpness and Saturation of Images - Sharpness/Color
Saturation” (P. 373) in “Part 2 Copier”.
21. Color Saturation
Set the default of Color Saturation under Sharpness/Color Saturation in the Image Quality screen.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 2 as Normal.)
For details about Color Saturation, see “3.19 Adjusting the Sharpness and Saturation of Images - Sharpness/
Color Saturation” (P. 373) in “Part 2 Copier”.
22. Color Shift
Set the default of Color Shift in the Image Quality screen. Enter the setting values using the numeric
keypad referring to the table below.
(Default is 2 as Normal.)
For details about Color Shift, see “3.20 Adjusting Tone - Color Shift” (P. 375) in “Part 2 Copier”.
Setting Value Description
0 Sharper
1Sharp
2Normal
3Soft
4 Softer
Setting Value Description
0 Higher
1High
2Normal
3 Low
4 Lower
Setting Value Description
0 Coolest
1 Cool
2Normal
3Warm
4Warmest

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English