5.8 Scan Mode Settings
174
5
System Administration Mode Settings
3. Mixed Size Originals
Set the default of Mixed Size Originals in the Scan Options screen.
Set whether or not to use the mixed size originals feature when using the DADF for scanning.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 0 as Off.)
For details about mixed size originals, see “3.3.5 Mixed Size Originals” in “Part 2 Scanner” of the User Guide
(Printer/Scanner).
4. Border Erase - Top & Bottom
Set the defaults for the top and bottom edge erase dimensions.
(Default is 2 mm.)
For details about setting top and bottom edge erase, see “3.3.9 Border Erase” in “Part 2 Scanner” of the User
Guide (Printer/Scanner).
5. Border Erase - Left & Right
Set the defaults for the left and right edge erase dimensions.
(Default is 2 mm.)
For details about setting left and right edge erase, see “3.3.9 Border Erase” in “Part 2 Scanner” of the User
Guide (Printer/Scanner).
Setting Value Description
0 Off
1On
Setting Value Description
0 None
1 to 50 Set the top and bottom edge erase dimensions in 1 mm increments.
Setting Value Description
0 None
1 to 50 Set the left and right edge erase dimensions in 1 mm increments.
To Next Page
Loading...
Need help?
General
