Fuji Xerox DocumentCentre C400 Series User Manual

5.8 Scan Mode Settings
176
5
System Administration Mode Settings
9. Lighter/Darker
Set the default of Lighter/Darker under Lighter/Darker/Contrast in the Image Quality/File Format
screen. Enter the setting values using the numeric keypad referring to the table below.
(Default is 3 as Normal.)
For details about Lighter/Darker, see “3.3.11 Lighter/Darker/Contrast” in “Part 2 Scanner” of the User Guide
(Printer/Scanner).
10. Contrast
Set the default of Contrast under Lighter/Darker/Contrast in the Image Quality/File Format screen.
Set the contrast for the document to be scanned. The contrast setting is enabled when Output Color is
not set to Black.
Enter the setting values using the numeric keypad referring to the table below.
(Default is 2 as Normal.)
For details about contrast, see “3.3.11 Lighter/Darker/Contrast” in “Part 2 Scanner” of the User Guide
(Printer/Scanner).
Setting Value Description
0 Lighter (+3)
1 Lighter (+2)
2 Lighter (+1)
3Normal
4 Darker (+1)
5 Darker (+2)
6 Darker (+3)
Setting Value Description
0 Higher
1High
2Normal
3 Low
4 Lower

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English