xix
When relocating the machine, contact our Customer Support Center.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine
is moved with the power cord attached, it can cause damage to the cord which could result
in fire or electric shock.
When moving the machine, do not tilt it more than 10 degrees. If tilted excessively, the
machine may fall over and cause injuries.
When the machine is installed, be sure to lock the caster stoppers. An unlocked machine
may fall over or slide and cause injuries.
● This machine is capable of operating normally within the following recommended environ-
mental limits.
Temperature range 10 - 32 °C
Humidity range 15 - 85%
(no condensation)
Humidity should be 47.5% or below at 35°C, and temperature should be 28°C or below at
85% humidity.
Sudden temperature fluctuations can affect copy quality. Rapid heating of a cold room can cause conden-
sation inside the machine, directly interfering with image transfer.
● Do not expose the machine to direct sunlight. Exposure to direct sunlight can adversely
affect the machine’s performance.
● If the Ethernet cable is directly connected to the outside, lightning strikes may cause the
machine to malfunction. Internal Ethernet cable connections only are allowed.
10
°
10
°
10
°
10
°
Front
Front
Rear
Rear
Left
Right
Left
Right
To Next Page
Loading...
Need help?
General
