6.6 Printing Reports/Lists
230
6
Managing Totals and Outputting Reports
2 sided printing impossible
due to insufficient memory
“Cause” 2 sided printing was not possible due to insufficient
memory.
“Remedy” Increase the print page buffer, and instruct it to
print again.
See “5.7.1 Allocate Memory” (P. 167)
PostScript language pars-
ing error
“Cause” An error occurred during PostScript (option) pro-
cessing.
“Remedy” Either confirm the print data, or click Spool Set-
tings on the Details tab to set bi-directional commu-
nications off.
Print using substitute font “Cause” Printing was performed using a substitute font.
“Remedy” Check the print data.
Cannot register forms.
(registration upper limit
exceeded)
“Cause” The form could not be registered as the PCL form
registration upper limit was reached.
“Remedy” Delete unwanted forms. The maximum number of
forms that can be registered is 2048.
See “5.7.1 Allocate Memory” (P. 167)
Cannot register user data.
(insufficient memory)
“Cause” User-defined data cannot be registered as there is insuf-
ficient PCL user definition memory area.
“Remedy” Increase PCL user definition memory area.
See “5.7.1 Allocate Memory” (P. 167)
Cannot register logos.
(registration upper limit
exceeded)
“Cause” Logo data could not be registered as the PCL logo
data registration upper limit was reached.
“Remedy” Delete unwanted logo data.
Numerical value operation
error
“Cause” A numerical value operation error occurred.
“Remedy” Check the print data.
HP-GL/2 command error “Cause” An HP-GL/2 command error occurred.
“Remedy” Check the print data.
PCL command error “Cause” A PCL command error occurred.
“Remedy” Check the print data.
Cannot register form/logo.
(insufficient memory)
“Cause” Forms or logo data cannot be registered as there is
insufficient PCL user definition memory.
“Remedy” Increase memory.
See “5.7.1 Allocate Memory” (P. 167)
Printed Details Cause and Remedy
To Next Page
Loading...
Need help?
General
