Fuji Xerox DocumentCentre C400 Series User Manual

3.30 Making Copies of Documents at Different Settings in a Single Operation - Build Job
414
3
User Friendly Features
Basic Copying Added Features Image Quality Others
■When Sample Set is set to Off
When the Off button is selected for Sample Set at step 5, the procedure ends at this step. Setting up of
the Build Job feature ends, and copying of all documents begins.
■When Sample Set is set to On
Output of the sample copy begins and only one copy is output at the details preset to the Build Job fea-
ture.
When the On button is selected for Sample Set at step 5, proceed to step 16.
15
Confirm the output state of the sample copy.
16
After you have confirmed the output state, select whether or not to out-
put the remaining number of copies.
■To cancel copying of the remaining copies
Select the Stop button. Copying of the remaining number of copies is canceled.
■To change the number of copies
Select Change Settings....
The Change Settings screen is displayed.
Quantity:
Black
1 A 4
10/10
Stop
1
Sample Set selected -- Making copies...
Free Memory 80%
Quantity:
1/20
Copy Job
Close
:Doc. No. 00002
1
Check whether the output is desirable.
Touch Start to continue or Stop to cancel the job.
Free Memory 80%
Start
Change Settings...
Quantity:
Stop
Quantity:
Copy Job
Close
:Doc. No. 00002
1/20
180/180
1
Start
Change Settings...
Quantity:
180/180
Stop
Quantity:
1/20
Copy Job
Close
:Doc. No. 00002

Fuji Xerox DocumentCentre C400 Series Specifications

General

Brand	Fuji Xerox
Model	DocumentCentre C400 Series
Category	Copier
Language	English