3.1 Confirming Machine Status
43
3
Daily Care
4
If necessary, check the machine configuration or software version.
■To check the machine configuration
Select Machine Configuration.
The Machine Configuration screen is displayed.
Check the machine configuration using .
The following items can be confirmed in the Machine Configuration screen:
Output Device refers to installation of the finisher (option). If the finisher is installed, Finisher is dis-
played.
●
Configuration Code
●
Auto Document Feeder
●
Paper Tray
●
High Capacity Tray
●
Side Output Tray
●
Output Device
●
Offset Output Module
●
Duplex Module
●
Hard Disk
●
Page Memory Size
●
System Memory Size
●
PostScript, HP-GL/2
●
HP-GL/2
●
FAX Main Board
●
FAX Extended Board 1
●
FAX Extended Board 2
1
Close
Machine Information
Machine Configuration
79832133
Software Version
XX. XX. XX
For enquiry on maintenance and operation
Refer to the card pasted on the machine
or call your local Service Represantative.
Serial Number
017011968
2
Close
Machine Configuration
1/4
1. Configuration Code
Items
Contents
2. Auto Document Feeder
3. Paper Tray
4. High Capacity Tray
5. Side Output Tray
XXXXXXXX
Available
4 Trays (3-Tray Unit)
Unavailable
Unavailable
Page
To Next Page
Loading...