Chapter 2 Troubleshooting
2.2 Status Code List
2-28
033-799
Fax Codec Error
033-799
Press OK Button
<Fax Codec Error>
In MH,HR,MMR receive, exceed the maximum
number of received lines for 1 page.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
034-508
Fax Communication
Error
034-508
Press OK Button
<Command Refuse Signal Send>
Send command refuse signal to stop communica-
tion.
The sender discontinued the communication.
No action is
required
034-515
Fax Communication
Error
034-515
Press OK Button
<DIS DCS Illegal Command Receive>
Receive illegal command such as DIS, DCS receive
from calling terminal in spite of having no ability to
receive.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
034-791
No Answer
Check Line Connec-
tion
034-791
Press OK Button
<Check Line Connection>
Line connection error (unconnected or mis con-
nected) might have occurred.Check the line con-
nection.
Check the line
connection
034-799
Fax Number Error
034-799
Press OK Button
<No Dial Data>
Auto dial is activated but no dial data exist.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-701
Target Fax
is Not Answering
035-701
Press OK Button
<Send T1 Time Out>
In send, T1 timeout.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-702
Fax Communication
Error
035-702
Press OK Button
<Receive DCN>
DCN receive.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-704
Fax Communication
Error
035-704
Press OK Button
<Not Send Ability>
Remote device has no ability to send.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
Status
Code
LCD Message Name/Description of Error FIP
To Next Page
Loading...
