Fuji Xerox DocuPrint M355df

Chapter 2 Troubleshooting
2.2 Status Code List
2-31
035-740
Fax Communication
Error
035-740
Press OK Button
<ECM Send EOR-Q Send>
IN ECM send, send EOR-Q.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-742
Fax Communication
Error
035-742
Press OK Button
<ECM Receive EOR-Q Receive>
IN ECM receive, receive EOR-Q.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-746
No Dial Tone
035-746
Press OK Button
<Before Dial Tone>
Cannot detect dial tone before dialing.
Replace the
PWBA ESS.
(REP18.1)
035-779
Fax Communication
Error
035-779
Press OK Button
<FAX FWD document change error>
FAX forward document change error.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-781
Target Fax Busy
035-781
Press OK Button
<Target Fax Busy>
Detect busy tone after dialing.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-792
Fax Communication
Error
035-792
Press OK Button
<JM Not Detection>
JM undetected.
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
035-793
Fax Communication
Error
035-793
Press OK Button
<Digital Line Detection>
Connected to digital line and cannot connect.
(Detect when connecting to line.)
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
041-340
MCU NVRAM Error
041-340
Code:xxxxxxxx
Restart Printer
<IOT NVRAM Error>
The operation error of NVM (read/write check error
etc.) is detected.
Replace the
PWBA ESS.
(REP18.1)
If the problem
cannot be
solved, replace
the printer.
Status
Code
LCD Message Name/Description of Error FIP