Chapter 2 Troubleshooting
2.2 Status Code List
2-35
092-661
Env Sensor Error
092-661
Restart Printer
<IOT Environment Sensor Error>
The Temp. Sensor or the Humi. Sensor error was
detected.
FIP1.10
093-426
%s
Replace Toner Car-
tridge Soon
Life Almost Over
<Toner Near Life>
It was detected that the Toner Cartridge needed to
be replaced soon.
Replace the
TONER CAR-
TRIDGE
(PL8.1.2)
093-922
Low Toner Density
Remove Toner,
Shake Cartridge
and Reinstall
<Toner Low Density>
Low concentration of the Toner was detected.
FIP1.25
093-925
Toner CRUM Error
093-925
Reseat or Replace
Toner Cartridge
<Toner CRUM Error>
The Toner CRUM error was detected.
FIP1.26
093-926
Invalid Toner Cartridge
Reseat Toner Car-
tridge
<Toner CRUM ID Error>
The Toner CRUM ID error was detected.
FIP1.26
093-928
Toner Type Error
093-928
Reseat or Replace
Toner Cartridge
<Toner Type Error>
The Toner Type Error was detected.
FIP1.26
093-933
Out of Toner
Replace
Toner Cartridge
<Toner Life Over>
It was detected that the Toner Cartridge needed to
be replaced soon.
Replace the
TONER CAR-
TRIDGE
(PL8.1.2)
093-973
Toner Cartridge
Detached
093-973
Insert Toner Cartridge
<Toner Detached>
It was detected that the Toner CRUM is not at the
specified position.
(Loose CRUM)
FIP1.26
116-210
USB Host Error
116-210
Restart Printer
<USB Host Error>
Fatal error of USB Host driver.
Replace the
PWBA ESS.
(REP18.1)
116-314
MAC Address Error
116-314
Restart Printer
<MAC Address Error>
On Board Network MAC Address Checksum Error.
Replace the
PWBA ESS.
(REP18.1)
If the problem
cannot be
solved, replace
the printer.
116-315
RAM Error
116-315
Restart Printer
<ESS On Board RAM W/R Check Fail>
Detected by On Board RAM W/R Check at the time
of initialization.
Replace the
PWBA ESS.
(REP18.1)
116-316
RAM Error
116-316
Restart Printer
<ESS DIMM Slot RAM W/R Check Fail>
Detected by DIMM Slot RAM W/R Check at the time
of initialization.
FIP1.27
Status
Code
LCD Message Name/Description of Error FIP
To Next Page
Loading...
