Chapter 2 Troubleshooting
2.2 Status Code List
2-37
116-362
PCI Error
116-362
Restart Printer
<PCI Bus #0 Host Bridge Controller Error>
PCI Bus #0 Host Bridge Controller Error. (Con-
nected with Remora EX port)
Replace the
PWBA ESS.
(REP18.1)
116-363
PCI Error
116-363
Restart Printer
<PCI Bus #1 Host Bridge Controller Error>
PCI Bus #1 Host Bridge Controller Error. (Con-
nected with Remora EX port.)
Replace the
PWBA ESS.
(REP18.1)
116-364
Clock Error
116-364
Restart Printer
<Timer Fail>
Timer error is detected.
Replace the
PWBA ESS.
(REP18.1)
116-366
PCI Error
116-366
Restart Printer
<PCI Bus #1 Error Detected>
PCI Bus #1 Uncorrectable Error Detected.
(Connected with RemoraEX(x1 port))
Replace the
PWBA ESS.
(REP18.1)
116-368
PCI Error
116-368
Restart Printer
<PCI Error Messages received from Bus #0 -
Device #1>
Remora EX PCI x1 port Error. (Device ID 0x65 (x1))
Replace the
PWBA ESS.
(REP18.1)
116-369
PCI Error
116-369
Restart Printer
<PCI Error Messages received from Bus #0 -
Device #0>
Remora EX PCI x4 port Error. (Device ID 0x64 (x4))
Replace the
PWBA ESS.
(REP18.1)
116-390
NV RAM Error
116-390
Restart Printer
<ESS NVRAM1 SIZE And ID Check Fail>
Detected by consistency check between NVRAM
size requested by the system and actual size and
consistency check of ID recorded at the first power-
on.
Replace printer
116-396
Scan Error
116-396
Restart Printer
<Fatal Error Related to Maillib Other Errors (of File
2 Net Library)>
S/W bug.
Replace the
PWBA ESS.
(REP18.1)
116-721
Memory Full
Job too Large
116-721
Press OK Button
<Collate Full>
Unable to collate due to insufficient memory.
Take correc-
tive actions at
the host side.
116-722
WSD Scan Address
Error
116-722
Press OK Button
<Web Services on Device Scan destination error>
The scan job cannot be executed on the device-
driven Web Services on Device Scan, because the
destination PC has been stopped.
Take correc-
tive actions at
the host side.
116-987
Scan Error
116-987
Restart Printer
<Fatal Error Related to Format Library>
S/W bug.
Replace the
PWBA ESS.
(REP18.1)
117-315
MFP EEPROM Error
117-315
Restart Printer
<EEPROM Driver Error>
EEPROM Driver program error.
Replace the
PWBA ESS.
(REP18.1)
If the problem
cannot be
solved, replace
the printer.
117-331
Controller Error
117-331
Restart Printer
<DSP-related Program Internal Error>
In relation to DSP, the following internal error has
occurred.
- O
S function return v
alue error.
- DSP program load fail.
Replace the
PWBA ESS.
(REP18.1)
Status
Code
LCD Message Name/Description of Error FIP
To Next Page
Loading...
Need help?
General
