TX2550 M4 Upgrade and Maintenance Manual 477
Converting a floorstand model to a rack model
Assembling the rack front cover
Figure 341: Rack mounting brackets with quick release levers
I The rack front cover consists of a plastic frame and two rack mounting
brackets with quick release levers.
Figure 342: Installing rack mounting brackets
Ê Fit the rack mounting bracket with the FUJITSU logo on the two hooks on
the right side of the rack front bezel (1).
Ê Firmly press down on the rack mounting bracket until it is fully seated in the
rack front bezel (2).
Ê Mount the second rack mounting bracket to the left side of the rack front
bezel accordingly.
To Next Page
Loading...
