5.5 Setting the Trigger Function
116
Set IN/OUT and the upper limit value and lower limit value.
IN/OUT:
Upper/Lower:
Set the level value for applying a trigger. The scaling setting is reflected. It is not
possible to set an upper limit value that is smaller than the lower limit, and a
lower limit value that is larger than the upper limit value.
When Window Trigger is Selected
Selectable
Items
Explanations
IN
A trigger is applied when a value enters within the range of the window
(upper and lower limit values).
OUT
A trigger is applied when a value exits from the range of the window
(upper and lower limit values).
A trigger is not applied if the trigger condition is satisfied at start time.
Example:
Window out trigger (upper limit value: 1 V, lower limit value: -1 V)
-1 V
1 V
T
0 V
Start
A trigger is not applied when out of the
window from the start.
To Next Page
Loading...
